How do I locate a GFCI outlet?

How to Locate a GFCI Receptacle

1. Go to the kitchen, bathroom, garage, crawl spaces, unfinished basement and outdoor outlets and plug in the outlet tester.
2. Locate the breaker box.
3. Search for any GFCI outlets.
4. Press the test button to deactivate any outlets loading off the GFCI unit.

Where are GFCI outlets usually located answers?

In laundry rooms and utility rooms, GFCIs should be installed on outlets within six feet of sinks, washing machines, and water heaters. They should also be installed within six feet of a wet bar and in garages and unfinished basements.

Do you need GFCI in garage?

GFCI protection is required for 125-volt to 250-volt receptacles supplied by single-phase branch circuits rated 150 volts or less to the ground. GFCI receptacles are required in bathrooms, garages, crawl spaces, basements, laundry rooms and areas where a water source is present.

Where is the GFCI for outside outlets?

Any 15-amp, 20-amp, or 120-volt outdoor outlet, must have GFCI protection. There needs to be at least one at the front of your house, and one in the back, no higher than six feet, six inches off the ground, to accommodate your electrical needs.

Does an outdoor receptacle need to be GFCI?

Outdoor electrical outlets differ from indoor outlets because they have watertight covers that protect the outlet even with a cord plugged in. Plus, the National Electrical Code requires all outdoor outlets to be GFCI outlets (ground fault circuit interrupter outlets).

Where must GFCI receptacles be installed in residential garages?

Does an outdoor outlet have to be GFCI?

Where is the GFCI for outdoor outlets?

GFCI Outlet Requirements Any 15-amp, 20-amp, or 120-volt outdoor outlet, must have GFCI protection. There needs to be at least one at the front of your house, and one in the back, no higher than six feet, six inches off the ground, to accommodate your electrical needs.

Does every outlet in a garage need to be GFCI?

Do all garage outlets need to be GFCI? All garage outlets must be GFCI. Ground-fault circuit interrupters protect users against shock by cutting off the power when they sense a short. It is an electrical violation to have non-GFCI outlets in your garage.

Where should I put GFCI in garage?

The actual verbiage from the NEC states that GFCI outlets be installed in: “Garages, and also accessory buildings that have a floor located at or below grade level not intended as habitable rooms and limited to storage areas, work areas, and areas of similar use.”

Where should GFCI outlets be installed?

GFCI outlets must be installed in any area where electricity and water may come into contact, including basements, pools, spas, utility rooms, attached garages and outdoors. Any bathroom or garage outlet within 6′ of a sink must be GFCI protected.

Should all outlets be GFCI?

Bathrooms – All bathroom receptacles should have GFCI outlets installed. Garages & Sheds – Any area inside or outside of the house that is not considered a “habitable” room should include GFCI outlets. Basements – All unfinished basements and crawl spaces should include GFCI outlets as these are high-moisture areas.

Where do I need GFCI?

A GFCI should be used in any indoor or outdoor area where water may come into contact with electrical products. The National Electrical Code currently requires that GFCIs be used in all kitchens, bathrooms, garages, and outdoors.

When were GFCI receptacle outlets first required?

GFCI receptacles were required in houses starting in 1971. Originally they were only required at the exterior of the house and by swimming pool equipment. Over the years, GFCI receptacles have been required in more locations such as garages, bathrooms, kitchens, etc.