Where is the Setup button on Philips universal remote?
Table of Contents
If there is, you have a slightly older version of the remote. Point your remote at your device and press the setup button. Hold it down for 5 seconds. Once the red LED light near the top comes on, release the setup button.
How do I turn my universal remote back on?
Step backward – Press the rewind (REW) key on the remote to step back through the codes one at a time.
How do I reset my Philips universal remote?
How to reset the Philips TV remote control to factory setting…
- Put the remote in ‘Erase mode’ Starting condition is ‘TV’ mode. Press simultaneously ‘OK’ + ‘MUTE’ key for 5 seconds.
- Select the desired mode to be erased. With the SELECT button you can select the wanted mode to be deleted.
- Confirmation.
Why won’t my universal remote work on my TV?
Make sure there are no obstructions between the device you wish to control and the remote itself. Most remote controls use infrared (IR) technology, which means they need to be aimed directly at the device you want to control. If something is blocking the remote, your commands will not work.
What are the codes for a Philips universal remote?
Remotes for TV
| TV Brand | Philips Universal Remote Code |
|---|---|
| PHILIPS | 0807, 0022, 0020, 0422, 0122, 0222, 0322, 0002, 0520, 0919, 0521, 0621, 0430, 0247, 0901, 0402, 0408, 0109, 0210, 0310, 0715 |
| PHILIPS-MAGNAVOX | 0807, 0022, 0322, 0919, 0224, 0430 |
| PILOT | 0002 |
| PIONEER | 0120, 0719, 0808, 0002, 0502, 0610, 0519 |
How do I program the Philips Universal Remote Control to devices?
Turn on the device you wish to program to operate with the Philips Universal Remote Control. Hold down the “Code Search” button on the remote control. Release the button after the red indicator light blinks. Press the device button, such as “TV” “CLB” “VCR” or “SAT” This will make…
How do I enter the code on my Philips TV remote?
Using the number button on the remote, find the 4-digit code on the code list assigned for the brand of your device. In the event you cannot find the code, enter ‘9999’. The LED turns off if you have entered a wrong code. This case, you need to restart the procedure by re-entering another code.
How do you program a universal remote to a smart TV?
“Switch On” the smart device like “TV” that you want the universal remote to operate. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program. Point out the remote to device and click on “CH+” & “CH-“ switches.
How do I find the code on my universal remote?
Find your device’s 4 or 5-digit code by consulting the instruction manual. Open your universal remote’s instruction manual and flip to the back. You’ll find a table of brand names and a list of corresponding codes. Once you find your brand, look at the list of devices and find your model’s unique code.