Why does my washing machine keep tripping the GFCI?
Table of Contents
- 1 Why does my washing machine keep tripping the GFCI?
- 2 Should a washing machine be plugged into a GFCI outlet?
- 3 Will a washing machine trip a GFCI?
- 4 Why would a washing machine trip the power?
- 5 How many amps does a washing machine use?
- 6 Why does my Whirlpool washer keep tripping the breaker?
- 7 Why does my washing machine keep Tripping the GFCI outlet?
- 8 Do I need a GFCI for my Kenmore Elite washer?
Why does my washing machine keep tripping the GFCI?
To narrow this problem down, there are three places that could be causing the GFCI to trip, a malfunction in the washing machine, a problem with the downstream wiring (aka load side of the GFCI), or the GFCI outlet itself.
Should a washing machine be plugged into a GFCI outlet?
It is possible for homeowners to believe that a washing machine requires a GFCI outlet. If you only have a washing machine in the laundry room, GFCIs are not required. A GFCI outlet is required if the sink is within six feet of the washing machine outlet.
Why does my washing machine keep tripping the outlet?
The top reasons why a washing machine may trip your circuit breaker include a bad door latch assembly, a bad timer, or a faulty water level control switch. The motor brushes or motor control board could cause your circuit breaker to trip, as well.
How do I stop my electric washer from tripping?
We advise you to let your washing machine dry out for between 24 and 48 hours and then try again. If the problem is still there, check the door lock, as it may have a short circuit, and then replace it if necessary.
Will a washing machine trip a GFCI?
When a GE washer keeps tripping the GFCI, the problem might be the GFCI or outlet. However, you might also be dealing with melted wiring inside the washing machine’s cable and plug. Additionally, blown fuses and faulty wiring inside the washing machine could cause a GFCI to trip constantly.
Why would a washing machine trip the power?
The main cause for this is faulty components that are energised when the machine is powered on. Some of these components include the heating element, motor, inlet water valve, door lock, and main power switch. Test each of them to see where the problem is resulting from and repair them accordingly.
Does a washing machine need a 20 amp outlet?
In the Laundry Room Your laundry room should have a dedicated circuit of at least 20 amps. If you have a gas dryer, both your washing machine and gas dryer may be plugged into the same outlet. If you have an electric dryer, it will need its own dedicated 20-amp, 220-volt circuit.
What would make a washing machine trip the electric?
How many amps does a washing machine use?
Ratings of commonly used household appliances
| Domestic Portable Appliance | Amps Used | Watts Used |
|---|---|---|
| Desktop computer | 1.3 | Up to 300 |
| Television 55” UHD | <0.5 | 120 |
| Games console | 0.86 | 200 |
| Washing machine | 10 | 2200 |
Why does my Whirlpool washer keep tripping the breaker?
Your Whirlpool Washer may be tripping the circuit breaker if the circuit line isn’t rated to handle its electrical load. The circuit should also be separate from any other electrical supply lines to prevent overloads from other appliances.
How many amps does a washing machine draw?
Does my washing machine need to be on its own circuit?
Your laundry room should have a dedicated circuit of at least 20 amps. If you have a gas dryer, both your washing machine and gas dryer may be plugged into the same outlet. If you have an electric dryer, it will need its own dedicated 20-amp, 220-volt circuit.
Why does my washing machine keep Tripping the GFCI outlet?
If the outlet trips when the washing machine isn’t running and isn’t even plugged in, then there’s a fault in the wiring on the load side of the GFCI outlet.
Do I need a GFCI for my Kenmore Elite washer?
You need the GFCI to protect the washer. It is after all filled with water and should have two water spigots nearby for the incoming water flow. Yes, one would think that it would need to be on a dedicated outlet, but you need that protection from water that only a GFCI would give you.
How to tell if a GFCI outlet is bad?
If there isn’t anything downstream, then plugging the washing machine into another GFCI outlet, or simply swapping out the outlet for a known good GFCI outlet, will identify if the outlet itself is faulty.
Why does my washing machine drain pump keep Tripping the breaker?
The drain pump drains the water out of your washing machine. The circuit breaker will trip: If there is a leak and the water runs onto the drain pump’s coil. If the pump itself is leaking. If the drain pump has a short circuit.